Installation; Tools And Requirements - PLYMOVENT MOBILEGOplus Manual De Instalación Y De Uso

Aspirador fijo para humos de soldadura con dos brazos fle
Ocultar thumbs Ver también para MOBILEGOplus:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Modifications
Modification of (parts of) the product is not allowed.

installation

- The installation of this product is exclusively reserved to
authorised, trained and qualified engineers.
- The electric connection must be executed in accordance with
the local codes and requirements. Ensure compliance with
the EMC regulatory arrangements.
- During installation, always use Personal Protective
Equipment (PPE) to avoid injury. This also applies to persons
who enter the work area during installation.
- Make sure that the workspace is well illuminated.
- Stay alert and keep your attention to your work. Do not
install the product when you are under the influence of
drugs, alcohol or medicine.
- Air containing particles such as chromium, nickel, beryllium,
cadmium, lead etc., should never be recycled. This air must
always be brought outside the working area.
use
WaRNiNg!
Fire hazard! Do not use the product for:
- polishing applications in combination with
grinding, welding or any other application that
generate sparks
are highly flammable and pose a high risk of filter fires when
exposed to sparks)
- arc-air gouging
- extracting and/or filtering flammable, glowing or
burning particles or solids or liquids
- extracting and/or filtering of aggressive fumes
(such as hydrochloric acid) or sharp particles
- extracting and/or filtering dust particles which are
released when welding surfaces treated with
primer
- sucking cigarettes, cigars, oiled tissues, and other
burning particles, objects, and acids
WaRNiNg!
Explosion hazard! Do not use the product for
explosion-hazardous applications, e.g.:
- aluminium laser cutting
- grinding aluminium and magnesium
- explosive environments or explosive substances/
gases
WaRNiNg!
Do not use the product for:
- extraction of hot gases (more than 70°C/158°F
continuously)
- flame spraying
- oil mist
- heavy oil mist in welding fume
- extraction of cement, saw dust, wood dust etc.
- Inspect the product and check it for damage. Verify the
functioning of the safety features.
- Do not put the product in front of entrances and exits which
must be used for emergency services.
- During use, always use Personal Protective Equipment (PPE)
to avoid injury. This also applies for persons who enter the
work area.
- Check the working environment. Do not allow unauthorised
persons to enter the working environment.
- Protect the product against water and humidity.
- Make sure the room is always sufficiently ventilated; this
applies especially to confined spaces.
- Make sure that the workshop, in the vicinity of the product,
contains sufficient approved fire extinguishers (suitable for
fire classes ABC).
- Do not leave any tools or other objects in or on the unit.
- The welding current return circuit between the workpiece
and the welding machine has a low resistance. Thus avoid
connection between the workpiece and the MobileGo
0000115336/010518/0 MobileGo
(fibers from polishing or abrasive flap disks
60Hz
plus
that there is no possibility of the welding current flowing
back to the welding machine via the protective earth
conductor of the MobileGo
Service, maintenance and repairs
- Obey the maintenance intervals given in this manual.
Overdue maintenance can lead to high costs for repair and
revisions and can render the guarantee null and void.
- Always use Personal Protective Equipment (PPE) to avoid
injury. This also applies for persons who enter the work area.
- Make sure the room is sufficiently ventilated.
- Use tools, materials, lubricants and service techniques which
have been approved by the manufacturer. Never use worn
tools and do not leave any tools in or on the product.
- Clean the area afterwards.
aTTENTioN
Service, maintenance and repairs must be
performed by authorised, qualified and trained
persons (skilled) using appropriate work practices.
aTTENTioN
Before you carry out service, maintenance and/or
repair jobs:
- fully disconnect the unit from the mains
WaRNiNg
The industrial vacuum cleaner that you use during
service and maintenance must meet HEPA class
(efficiency ≥99.97% at 0.3 µm).
4
iNSTallaTioN
4.1

Tools and requirements

You need the following tools and requirements to install the
unit:
- basic tools
4.2
unpacking
Make sure that the product is complete. The package contains:
Filter unit
- mobile filter unit
- washer M6 (8)
- bolt M6x25 (8)
Extraction arm
- extraction arm (pre-assembled)
- rotating flange
- arm swivel ring, incl. rubber collar
- extraction hood
- hood collar with safety mesh
- washer M20
4.3
arm on mobile unit
To install the extraction arm, do the following.
Tip
Do a balance check of the arm before you fasten the
hoses. Refer to section 6.3.
Fig. 4.1
• Install the rotating flange (C) on the filter unit with the 8
bolts M6x25 (A) + washers M6 (B).
, so
plus
.
plus
personal protective equipment (ppE)
Wear respiratory protection and protective
gloves during service, maintenance and
repairs.
EN - 5

Publicidad

Tabla de contenido
loading

Tabla de contenido