Cleaning And Care - Delta MultiChoice 17T Serie Instrucciones Para La Instalación

Installation
Installation and Adjustment of the
4
Failure to do so may cause injury.
1
6
5
Adjust temperature limit stop! Turn on
water supplies; LET THE WATER RUN
AT BOTH FULL HOT AND FULL COLD
TO ENSURE THE WATER IS RUNNING
AS HOT/COLD AS POSSIBLE. Place
a thermometer in a plastic tumbler, and
hold the tumbler in the water stream.
Place the temperature knob (1) onto the
splines (2), then rotate the temperature
knob until you achieve your maximum
Potential scald or thermal shock injury could result due to cross flow if outlet at the
5
shower is blocked or restricted (e.g.,pause control on showerhead). Be sure to point
showerhead away from you when restarting flow or install inlet check valves on both
supply lines to prevent possible injury.

Cleaning and Care

Care should be given to the cleaning
of this product. Although its finish is
extremely durable, it can be damaged by
harsh abrasives or polish. To clean, simply
wipe gently with a damp cloth and blot dry
with a soft towel.
2
4
3
Temperature Knob
desired temperature from the outlet (not
more than 120° or the lower temperature
mandated by your local plumbing code).
Remove the temperature knob and replace
onto the splines (2), making sure that the
temperature knob limit stop (3) hits against
the volume handle limit stop (4) as shown.
Secure the temperature knob using screw
(5) and place cap (6) on knob.
Warning: Scrubbing Bubbles
Cleaner and Lysol
Cleaner must not be used on the clear knob
handles and levers. Use of these cleaners
can result in cracked or severely damaged
handles. If overspray gets onto the handles,
immediately wipe them dry with a soft
cotton cloth.
6
1
Bathroom
®
Basin Tub and Tile
®
4
3