Kohler K-8034 Guia De Instalacion página 16

Escutcheon
Socket Wrench
With 11 mm Bit
Waterway
Screw
9. Install the Waterway
IMPORTANT! This step requires two people.
Insert an escutcheon assembly into each of the four openings in
the light panel. Orient each assembly so the double ribs on the
inside of each leak shield are facing toward the center of the
panel.
While one installer holds the light panel in place in the rough
opening, the other installer threads all four adapters onto the pipe
nipples to hang the fixture. Once the adapters are installed, the
panel can be released and should not be tight to the ceiling.
IMPORTANT! Secure the adapter sufficiently to create a water-tight
seal for the pipe threads.
Secure the adapter using the 11 mm bit (provided) with the 11
mm or 7/16" socket extension, and socket wrench. Use masking
tape to hold the bit in place to prevent it from falling off and
causing damage to your shower. The light panel should still sit
loosely against the ceiling.
Install the waterway by aligning the notch in the waterway with
the double ribs on the inside of the leak shield.
1078520-2-A
Light Panel
Frame
Finished
Ceiling
Adapter
Extension
Double Ribs
Inside Leak
Shield
16
Notch
Kohler Co.