Kohler K-8034 Guia De Instalacion página 18

Hinge Ribs
Groove
Nozzle Membrane
Attach the Sprayhead
10. Install the Trim
Attach the Sprayhead
With the hinge ribs of the sprayhead facing up, attach the
sprayhead to the waterway.
Using a 5/32" hex wrench, secure the sprayhead to the waterway
with the two hex screws. Do not overtighten.
Check the sprayhead for upward and downward movement and
that it sits squarely within the escutcheon.
Place the nozzle membrane over the sprayhead.
Align the long edge of the membrane with the hinge ribs.
NOTE: For optimum performance, ensure that the membrane is
applied evenly.
Applying pressure evenly, press the membrane seal into the
sprayhead groove.
Attach the Sprayface
Tilt the sprayhead to expose the ribs on the end.
Position the grooves of the sprayface over the hinge ribs of the
sprayhead.
Rotate the loose end of the sprayface toward the sprayhead, as
illustrated. Press the sprayface into place to cover the sprayhead.
Tilt the sprayhead assembly to expose the setscrew holes on the
edge of the sprayhead.
1078520-2-A
Waterway
Escutcheon
Sprayhead
Hex Screws
Setscrews
Attach the Sprayface
18
Hinge
Ribs
Sprayface
Kohler Co.