Specifications - Monitor Audio Gold W15 Manual Del Usuario

Specifications

System Format
Low Frequency Limit
Upper Frequency Limit
Low Pass Filter Alignment
Amplifier Power Output
Amplifier Classification
Equalisation
Phase Control
Auto Sensing Input Level
Requirements
Digital Volume Level
Drive Unit Complement
12v Trigger Input
Connections
Input Impedance
Dimensions (H x W x D)
Weight (unpacked)
Mains Input Voltage
Electrical Certifications
Power Consumption
Fuse Type
IR Remote Control Code
12
Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier
compartment
18Hz
40 - 120Hz Variable
Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
650 Watts Continuous. 1200 Watts (peak)
D2AUDIOTM DSP controlled, Class-D amplifier system. High current switch mode
power supply (smpsu)
4 Settings (Off/Music/Movie/Impact)
0-90-180-270 degrees
Line Level > 2mV. Standby after 10 minutes if no signal sensed
-60 to +10dB in 1dB increments
1 x 15" C-CAM® sub-woofer driver featuring triple suspension and 3" long throw
voice coil
3.5mm mono jack socket
Stereo RCA in/out
LFE in/out
12v Trigger in (3.5mm mono jack)
LEO - 3.5mm Microphone input jack (microphone supplied)
20K Ohms
430 x 400 x 400 mm (16 15/16 x 15 3/4 x 115 3/4 Inches)
Grille Depth: 28 mm (1 1/8 Inches)
35.3Kg (77.6lbs)
100 - 120 Vac / 220 - 240 50/60 Hz (Factory preset)
CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Maximum 1000W. Standby < 0.5W (ErP Compliance)
20mm UL/VDE (Value is region specific)
NEC SH6122
Gold W15 Owners Manual