AmplifierPanelAndDisplay - Monitor Audio Gold W15 Manual Del Usuario

AmplifierPanelandDisplay

1. RCA Line Level Inputs (Stereo Left & Right)
For connection to a 2 channel/ stereo amplifier system. Connection should be provided by a pair of high-quality signal
cables from the pre-out section of an amplifier. Switching between the Stereo input and LFE is done automatically. The LFE
will take priority if a LFE and Stereo signal is presented at the same time. Note:- cable lengths should not exceed 10 metres
to avoid interference from other electrical appliances.
2. RCA Line Level Outputs (Stereo Left & Right)
To be used to feed additional sub-woofers in addition to the Gold W15 by 'daisy chain' type connection. The outputs are link
out only connections and do not provide any form of filtering.
3. LFE Input (RCA Type)
This input is to be used when connecting the Gold W15 to an AV amplifier/ receiver. When using the LFE input, the crossover
function in the menu/ set-up is not used. This is due to the crossover function being controlled by the AV amplifier/
processor to which it is connected. Please refer to the crossover table on page 9 for further advice on which setting to use.
Input between LFE and Stereo input is switched automatically.
4
3
11
Gold W15 Owners Manual
Notes:
1. SILKSCREENED COOL GREY 1c
2. IMAGE FOR REFERENCE PURPOSES ONLY.
3. VERSION 8
1
2
4
5
6
7
8
9
10
10a
12
13