Video Connections; Composite Video Jack; Scart Terminal - Yamaha DVD-S661 Manual De Instrucciones

Video connections

If your AV receiver has video output jacks,
connect your receiver and then your TV so
that you can use one TV for several different
video sources (LD, VCR, etc.) by simply
switching the input source selector of your
receiver.
This unit has several types of video output
jacks. Use the one that corresponds to the
input jacks of the component to be connected.
COMPONENT
VIDEO
P / C Y
R R
COAXIAL P / C S VIDEO
B B
AUDIO OUT DIGITAL OUT VIDEO OUT
This unit
P P Y
B
R
<A> <B>
P P Y
R B
P /C P /C Y
R R B B
COMPONENT
VIDEO IN
AV receiver
VIDEO COMPONENT
OUT VIDEO OUT
VIDEO COMPONENT
IN VIDEO IN
TV
AV
S
V
Video pin cable
(supplied)
<C> <D>
V
S
S VIDEO VIDEO
INPUT INPUT
S VIDEO
OUT
S VIDEO
IN
Component video jacks <A>
Component video connections achieve higher
fidelity color reproduction than S-video
connections by transmitting video signals on
separate wires for luminance (Y: green) and
chrominance (P : blue, P
B
Connect the VIDEO OUT - COMPONENT
(Y, P /C , P /C ) jacks of this unit to
B B R R
component input jacks of your AV receiver
and then to those of your TV using a
commercially available component cable.
Observe the color of each jack when you make
connections.
If your receiver does not have component
output jacks, you can achieve a better video
image by connecting the component output
jacks of this unit directly to the component
input jacks of your TV.
S-video jack <B>
S-video connections achieve a clearer picture
than composite video connections by
transmitting video signals on separate wires
for luminance (Y) and chrominance (C).
Connect the VIDEO OUT - S VIDEO jack of
this unit to an S-video input jack of your AV
receiver and then to that of your TV using a
commercially available S-video cable.
Composite video jack <C>
Connect the VIDEO OUT - VIDEO jack of
this unit to a video input jack of your AV
receiver and then to that of your TV using the
supplied video pin cable.
SCART terminal <D>
If your TV has only a terminal for video input,
you can connect the TV directly to this unit.
Connect the AV terminal of this unit to
SCART input terminal of your TV using a
commercially available SCART cable.
Connections
: red).
R
9
En