Kohler K-302 Guía De Instalación Y Cuidado página 5

Ceiling
Supplies
Aspirator
Hot
Thread
Valve Unit
Protector
2. Complete the Bath and Shower Installation
For Ceiling Installations
NOTE: Do not use a three-valve yoke with ceiling supplies.
Turn the yoke over to allow the supplies to connect from the top
of the yoke.
Remove the aspirator with a 3/8" hex wrench and reinstall it in
the top of the yoke. Do not overtighten.
NOTE: Reversing the yoke for ceiling supplies will reverse the
direction in which the lever handles close.
For proper lever handle operation, open the valves and remove
and reverse the ceramic valves.
Make sure the valves are not dirty or damaged.
Wrench tighten the valves.
For All Installations
Install copper tubing and adapters between the yoke and shower
ell.
Install copper tubing and adapters between the yoke and bath ell.
Secure the tubing to the framing.
Install temporary 1/2" nipples into the shower and bath ells.
Kohler Co.
Shower
Ell
Cold
Adapters
for
Copper
Tubing
Bath
Ell
5
Temporary
Nipple
1/2"
Copper
Tubing
Temporary
Nipple
1205552-2-A