Using Your Refrigerator; Setting The Controls - Kenmore 795.7414 Manual De Uso Y Cuidado

Congelador inferior refrigerador
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SETTING THE CONTROLS

TEMPERATURE
The Refrigerator Temp. Control ranges from 33°F to
43°F (1°C to 7°C). Press the Refrigerator Temp button
to cycle through the available temperature settings one
increment at a time.
The Freezer Temp. Control range is from -7°F to 5°F
(-23°C to -15°C). Press the Freezer Temp button to
cycle through the available temperature settings one
increment at a time.
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. The controls are set
correctly when milk or juice is as cold as you would like
compartment is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the change to
stabilize before adjusting again.
Temperature Mode Switch Function (°F <->°C)
If you want to convert °F to °C or vice versa, press and
hold the Freezer Temp. and Refrigerator Temp. buttons at
the same time for approximately 5 seconds.
AIRFLOW
Cold air circulates from the freezer to the fresh food
section and back again through air vents in the wall
dividing the two sections. Be sure not to block vents while
storing items in your refrigerator. Doing so will restrict
become too warm or cause interior moisture buildup. (See

USING YOUR REFRIGERATOR

Accela Ice
This function increases both ice making and freezing
capabilities.
Press the Accela Ice button to illuminate the icon
and activate the function for 24 hours. The function
Stop the function manually by pressing the button
again.
Water Filter Reset
Replace the water filter when the Change Filter
icon turns on. After replacing the water filter,
p
seconds to turn the icon off. Replace the water filter
approximately every 6 months.
Air Filter Reset
The
Air Filter Reset button for three seconds to turn the
months.
Control Lock
The Control Lock function disables every other button on
the display. The dispenser pad is also deactivated.
When power is initially connected to the refrigerator,
the Control Lock function is off.
To lock the control panel buttons, press and hold the
Control Lock button until the
display and the function is activated.
To disable the function, press and hold the Control Lock
button for approximately 3 seconds.
DISPENSER
Select the desired dispenser mode using the Ice/Water
button on the control panel. Press the dispenser switch with
a glass or other container to dispense water, cubed ice or
crushed ice.
WARNING: The dispenser will not work if any door is
left open or if the control lock is engaged.
17
r
ess and hold the Water Filter Reset button for 3
helps remove odors from the refrigerator.
icon appears in the

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido