Honeywell QuickSTEAM HWM-330 El Manual Del Propietario página 4

QuickSteam_OM_04-25-06.qxd
Set-Up
NOTE: We recommend that the humidifier be disinfected prior to
first use. Please see CLEANING INSTRUCTIONS.
Select a firm, level, flat location - at least six inches (15 cm) from
any wall or object for proper air flow (Fig. 1). Place the humidifier
on a water-resistant surface, as water can damage furniture and
some flooring.
Kaz will not accept responsibility for property damage caused by
water spillage.
• Remove the Water Tank by grasping handle and pulling straight up
(Fig. 1). Set aside.
• Remove the Power Unit by grasping it and lightly tilting forward
while pulling up. You will feel the unit disengage from its lock
(Fig. 2). Set the Power Unit aside.
• Remove the Water Tray (Fig. 3). Set the Water Tray aside.
• Place one Mineral Absorption Pad flat on the Heating Plate.
See the MINERAL ABSORPTION PAD section (page 5) for
more information.
• Replace the Water Tray.
• Replace the Power Unit, making sure it is installed properly. Align
the back of the Power Unit directly behind the tabs of the Base and
press down firmly. You will hear a slight click. Your Power Unit will
be flush with the Base (Fig. 4).
• Fill the Water Tank with cool tap water (Fig. 5). See the FILLING
section (page 5) for more information.
NOTE: Save your box for end of season storage. (See END OF
SEASON CARE AND STORAGE section.)
4
4/25/06 4:53 PM Page 4
Fig. 1
6"
Fig. 2
Power
Unit
Base
Fig. 3
Removable
Water Tray
Base
Fig. 4