Specifications; Maintenance - Panasonic SC-AK331 Instrucciones De Funcionamiento

Specifications

AMPLIFIER SECTION
PMPO
FTC output power
THD 10%, both channels driven
100 Hz – 3 kHz
64 W per channel (5 Ω)
(Low channel)
3 kHz–10 kHz
(High channel) 60 W per channel (5 Ω)
Total Bi-Amp power
RMS output power
THD 10%, both channels driven
1 kHz
90 W per channel (5 Ω)
(Low channel)
10 kHz
(High channel) 90 W per channel (5 Ω)
Total Bi-Amp power
AMPLIFIER SECTION GCP
RMS output power
THD 10%, both channels driven
1 kHz
90 W per channel (5 Ω)
(Low channel)
10 kHz
(High channel) 90 W per channel (5 Ω)
Total Bi-Amp power
FM/AM TUNER, TERMINALS SECTION
Preset station
Frequency Modulation (FM)
Frequency range
PL
87.9 – 107.9 MHz (200 kHz steps)
87.5 – 108.0 MHz (100 kHz steps)
GCP
87.50 – 108.00 MHz (50 kHz steps)
Sensitivity
S/N 26 dB
Antenna terminal(s)
Amplitude Modulation (AM)
Frequency range
PL
520 – 1710 kHz (10 kHz steps)
GCP
522 – 1629 kHz (9 kHz steps)
520 – 1630 kHz (10 kHz steps)
Sensitivity
PL
S/N 20 dB (at 1000 kHz)
GCP
S/N 20 dB (at 999 kHz)
Audio performance (Amplifier)
Input sensitivity/Input impedance
Aux
Phone jack
Terminal
Mic jack
Sensitivity
Terminal

Maintenance

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
•
Never use alcohol, paint thinner or benzine to clean this unit.
•
Before using a chemically treated cloth, read the instructions that
came with the cloth carefully.
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
16
RQT7799
PL CASSETTE DECK SECTION
Track system
3300 W
Heads
Record/playback
Erasure
Motor
Recording system
Erasing system
Tape speed
248 W
Overall frequency response
(+3 dB, –6 dB at DECK OUT)
NORMAL
S/N
Wow and flutter
Fast forward and rewind time
360 W
DISC SECTION
Discs played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3 formatted
disc)
(3) MP3
Bit rate
360 W
MP3
Sampling frequency
MP3
FM 15 stations
CD
AM 15 stations
Decoding
Digital filter
D/A converter
Pickup
Wavelength
Beam Source
Audio output (Disc)
2.5 ØV (IHF)
Number of channels 2 (Stereo) (FL, FR)
2.2 ØV
75 Ω (unbalanced)
SPEAKER SECTION
Type
Speaker(s)
Woofer
Tweeter
Super tweeter
Impedance
HIGH
LOW
Input power (IEC)
560 ØV/m
HIGH
LOW
560 ØV/m
Output sound pressure level
Cross over frequency
250 mV, 14.7 kΩ
Frequency range
Stereo, 3.5 mm jack
Dimensions (WxHxD)
0.7 mV, 680 Ω
PL
Mono, 3.5 mm jack
GCP
Mass
4 track, 2 channel
Solid permalloy head
Double gap ferrite head
DC servo motor
AC bias 100 kHz
AC erase 100 kHz
4.8 cm/s
35 Hz – 14 kHz
50 dB (A weighted)
0.18% (WRMS)
Approx. 120 seconds with
C-60 cassette tape
32 kbps – 320 kbps
32 kHz, 44.1 kHz, 48 kHz
44.1 kHz
16 bit linear
MASH (1 bit DAC)
780 nm
Semiconductor laser
3 way, 3 speaker system (Bass reflex)
16 cm cone type
6 cm cone type
Piezo type
90 W (Max)
90 W (Max)
83 dB/W (1.0 m)
2.6 kHz, 10 kHz
37 Hz–23 kHz (–16 dB)
44 Hz–22 kHz (–10 dB)
240 x 330 x 230 mm
240 x 330 x 229 mm
For a cleaner, crisper sound
Clean the heads regularly to assure good quality playback and recording.
Use a cleaning tape (not included).
GENERAL
Power supply
PL
AC 110–127/220–240 V, 50/60 Hz
GCP
Power consumption
PL
GCP
Dimensions (WxHxD)
Mass
Operating temperature range
Operating humidity range
5 to 90 % RH (no condensation)
Power consumption in standby mode
PL
GCP
Note:
1. Specifications are subject to change without
notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
3. The labels "HIGH" and "LOW" on the rear
of the speakers refer to High frequency
8 fs
and Low frequency.
5 Ω
5 Ω
3.2 kg
AC 120 V, 60 Hz
238 W
255 W
250 x 330 x 341 mm
7.1 kg
+5 to +35 °C
0.38 W
0.85 W