Mobile Magnum Tm Refill System 8 With A 100' Handi-Gun - ICP HANDI-FOAM Instrucciones De Operación

MOBILE MAGNUM
®
Nitrogen Bottle
Red Nitrogen Hose
2
with Coupling (A)
8
Shipping Packet
(attached to the
side of the A
Cylinder)
Nitrogen
4
On/Off Valve
Prior to proceeding with setup, please review all instruction manuals, hose tag instructions and labels.
1. Verify chemical temperature is between 70–85°F (21–29°C), see TDS for product specific temperature
recommendations.
2. Before/during the system start-up process update the Daily Spray Log (A18013).
3. Attach the Nitrogen Regulator (#1) to the nitrogen bottle.
4. Attach the A-Side Red
a wrench.
5. Attach the Quick Disconnect on the
6. Attach the (B) Black Nitrogen Hose with Coupling (#3) to the Nitrogen Regulator (#1). Tighten fitting with
a wrench.
7. Attach the Quick Disconnect on the Black Nitrogen Hose with Coupling (#3) to the Nitrogen On/Off Valve (#4).
8. Remove the cap (A cylinder) and plug (B cylinder) from the Cylinder Outlet On/Off Valve (#5).
9. Attach the Gun Hose Assembly (#6 or #7)
(#5). Tighten fitting with a wrench.
10. Attach the Gun Hose Assembly (#6 or #7) black striped hose to the B-Side Cylinder Outlet On/Off Valve (#5).
Tighten fitting with a wrench.
11. Ensure the Handi-Gun
engaged when trigger is released.
12. Open Ball Valves #5 on each cylinder.
NOTE: Use of petroleum jelly (provided in nozzle packs) on all fittings will help prevent moisture contamination
on any exposed surfaces.
Storage Temperature
Optimum 75–85°F (24–29°C)
but not < 60°F or > 90°F
(not <16°C or >32°C)
REFILL SYSTEM 8 WITH A 100' HANDI-GUN
Nitrogen Regulator 1
A B
10
Mobile Magnum ®
Nitrogen Hose with Coupling (#2) to the Nitrogen Regulator (#1), Tighten fitting with
A-Side Red
A-Side Red
Trigger Safety is engaged. The Handi-Gun II
®
Process (Core)
Chemical Temperature
70–85°F (21–29°C)
Nitrogen Hose
3
with Coupling (B)
6
Hose Assembly
Cylinder Outlet
5
On/Off Valve
Cart
Nitrogen Hose (#2) to the Nitrogen On/Off Valve (#4).
striped hose to the A-Side Cylinder Outlet On/Off Valve
Outside Application
Temperature
40—100°F (4–38°C)
HOSE ASSEMBLY SETUP
®
• Operating Instructions, Daily Spray Log & Bill of
Lading are located in the Shipping Packet on the
side of the A-side cylinder.
ColorWise Nozzle
®
(Cone or Fan)
9
Handi-Gun ®
Trigger Safety
ColorWise
OR
11
(Long Cone or Fan)
Hi
Lo
Handi-Gun II
TM
Trigger Safety
(#7) Trigger Safety is automatically
TM
Surface Temperature
40—100°F (4–38°C)
10" (25 cm)
Handi-Gun
®
Hose Assembly
6
® Nozzle
7
Handi-Gun II TM
Hose Assembly
7