Technical Information; System Requirements; Product Specifications; Print Cartridge Yield - HP Photosmart D5300 Serie Guía Básica

Ocultar thumbs Ver también para Photosmart D5300 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3

Technical information

The technical specifications and international regulatory information for the HP Photosmart are
provided in this section.

System requirements

Software system requirements are located in the Readme file.

Product specifications

For product specifications, go to the HP Web site at www.hp.com/support.
Paper specifications
Main input tray capacity: Plain paper sheets: Up to 125 (20 lb./75 gsm. paper)
Output tray capacity: Plain paper sheets: Up to 50 (20 lb./75 gsm. paper)
Photo tray capacity: Photo paper sheets: Up to 20
NOTE:
Physical specifications
Height: 21.6 cm (8.5 inches)
Width: 45.2 cm (17.8 inches)
Depth: 38.5 cm (15.2 inches)
Weight: 6.8 kg (15 pounds)
Power specifications
Power consumption: 25 watts maximum (average printing)
Input voltage: AC 100 to 240 V ~ 600 mA 50-60 Hz
DC voltage: DC 32 V===550 mA, 16 V===400 mA
NOTE:
NOTE:
consumption can be lessened by enabling the Standby/Off state. To enable the Standy/Off state,
press and hold the On button for 3 seconds until the HP Photosmart turns off. When the
HP Photosmart is in the Standby/Off state, it will take longer than usual to turn back on.
Environmental specifications
Recommended operating temperature range: 15º to 32º C (59º to 90º F)
Allowable operating temperature range: 5º to 35º C (41º to 95º F)
Humidity: 15% to 80% RH non-condensing
Non-operating (Storage) temperature range: -40º to 60º C (-4º to 122º F)
In the presence of high electromagnetic fields, it is possible the output from the HP Photosmart
may be slightly distorted
HP recommends using a USB cable less than or equal to 3 metres (10 feet) in length to minimize
injected noise due to potential high electromagnetic fields

Print cartridge yield

Ink from the cartridges is used in the printing process in a number of different ways, including in the
initialization process, which prepares the device and cartridges for printing, and in printhead
servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink
is left in the cartridge after it is used. For more information, see www.hp.com/go/inkusage.
Visit
www.hp.com/pageyield
54
HP Photosmart D5300 series
For a complete list of supported media sizes, see the printer software.
Use only with the power adapter supplied by HP.
When the HP Photosmart is off, some amount of energy is still being consumed. Energy
for more information on estimated cartridge yields.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido