KitchenAid KSM1CB Instrucciones página 11

USING THE PRECISE HEAT MIXING BOWL
Preheating In Temper
To set the timer, press TEMPERATURE/
3
TIME selection toggle button once.
While the hour position flashes, turn the
TEMPERATURE/TIME selection toggle
button to set your desired time.
Preheating
When the time and temperature
5
are programmed, press the START/
CANCEL button. "Preheating" will
display. When the desired temperature
has been reached, a tone will sound 3
times and the timer will start to count
down.
NOTE: To program the temperature
without programming the timer, press the
START/CANCEL button immediately after
programming the temperature.
In Temper
Preheating In Temper
Repeat step 3 to set the minutes. (Time
4
can be selected in 1 minute increments
up to 1 hour. Times longer than 1 hour
are selected in 15 minute increments.)
Put ingredients into the stainless steel
6
bowl. Be sure not to fill past the "Max
fill" line. If desired, place the lid on
the bowl. The lid is used at higher
temperatures to maintain consistent
heat within the stainless steel bowl.
NOTE: When using the Precise Heat Mixing
Bowl by itself, place it on a flat, level surface.
The lid may be used at any time when using
without the Stand Mixer.
11