Artemide NODO-MASTER DALI Funciones Y Utilización página 21

NB: please note that on S4 dip-switch, n. 1 is the rightmost one, 10 the leftmost and that ON is bottom side!
NB: note that:
DMX
Address 10 9
1 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
1 OFF OFF OFF OFF OFF OFF OFF OFF OFF ON
are both related to address n. 1.
NB: S4-10 is not used, and must be always set to OFF.
Example:
NODO-MASTER DMX N. 1 set to DIRECT RGB, NODO-MASTER DMX N. 2 set to DIRECT MONOCHROME, NODO-MASTER DMX N. 3 set
to INDIRECT MONOCHROME:
NODO-MASTER DMX N. 1
S4 is set e.g. on address n. 5, so ON-OFF-ON-OFF-OFF-OFF-OFF-OFF-OFF-OFF
S2 is set to: ON-OFF-OFF-OFF, uses 3 addresses
NODO-MASTER DMX N. 2
S4 must be set on address n. 8 (NODO-MASTER DMX N.1 on S4 value + NODO-MASTER DMX N.1 on S2 value).
So S4 is set to: OFF-OFF-OFF-ON-OFF-OFF-OFF-OFF-OFF-OFF
S2 is set to: OFF-ON-OFF-OFF, uses 1 address
NODO-MASTER DMX N. 3
S4 must be set on address n. 9 (NODO-MASTER DMX N.2 on S4 value + NODO-MASTER DMX N. 2 on S2 value).
So S4 is set to: ON-OFF-OFF-ON-OFF-OFF-OFF-OFF-OFF-OFF
S2 is set to: OFF-OFF-OFF-ON, uses 1 address
See also Table 2 in chapter 6.2 for different fixtures combinations and Table 3 in chapter 7.2 for DMX address-settings
19
DIP-switch n.
8 7 6 5 4
Fig. 7: Settings of dip-switches in "DMX" mode
3 2 1