22
Controller Operation
3
Timed Chill Operation (Continued)
During chilling the display will show the time remaining with the Timed Chilling LED
Once the chilling time is completed the controller switches to the storage mode with the display showing 'End' press any button to mute the alarm,
press
to cancel the message.
Whilst the cabinet is in the storage mode the internal cabinet temperature will be displayed and the Timed Chilling LED
and Storage LED
will be illuminated.
To stop the programme press for
2 seconds
Temperature Chill Operation
Place the controller in 'stand–by' pressing for
2 seconds.
Ensure that the food probe is inserted into the product prior to commencing the temperature chill programme.
Press
'PoS' will be displayed and the Timed Chilling LED
Set-Temperature Chilling LED
flashing.
Press
the display will show the product end temperature, +3º C as standard, if no change to the temperature is required press
to start the programme.
If changes to the chill termination temperature are required press
Temperature Chilling LED will be flashing, press
to display the chilling temperature followed
or
to increase.
Once the product temperature has been achieved the controller switches to storage mode with the display showing 'End' press any button to mute the
alarm, press
to cancel the message.
Whilst the cabinet is in the storage mode the internal cabinet temperature will be displayed and the Set-Temperature Chilling LED
and Storage LED
will be illuminated.
To stop the programme press
for 2 seconds
Defrost
Defrost will be initiated automatically in the hold mode at pre-set intervals.
To initiate a manual defrost during the hold mode press
Alarms & Warnings
4
-- d --
Defrost in operation
AL
Low Temperature Alarm
AH
High Temperature Alarm
Air Probe Fault
PR1
PR2
Food Probe Fault
english
GB
on.
may be flashing, if it is Press
again to display
'PoS' will be displayed and the Set-
by to decrease the temperature
for 5 seconds, defrost will start with -- d -- being displayed.
3