Symbols On The Product - Sony HVO-3300MT Manual Del Usario

English
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
Indications for Use/Intended Use
Sony Medical Recorders are intended to record video and
still images from ultrasound, digital X-ray, endoscopic,
laparoscopic and other compatible diagnostic imaging
systems and surgical imaging systems. These medical
grade recorders can save recorded images to an internal
hard disk drive, a portable USB drive, an optical disk or
to a compatible network server. The recorded images can
be used for the patient record, training or education or for
sending to referring physicians. The recorders are suitable
for use in hospital radiology and operating rooms,
diagnostic imaging centers, surgical centers, clinics,
doctors' offices and similar medical environments.
Notes
• Images recorded with this equipment cannot be used for
diagnostic use.
• This equipment is for medical professionals.
• This equipment is intended for use in medical
environments, such as clinics, laboratory rooms, and
operating rooms.
Warning
To reduce the risk of fire or electric shock, do not
expose this equipment to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
No modification of this equipment is allowed.
Warning
To avoid the risk of electric shock, this
equipment must only be connected to a supply
mains with protective earth.
Warning
To disconnect the main power, unplug the power plug.
When installing the unit, incorporate a readily accessible
disconnect device in the fixed wiring, or connect the
power plug to an easily accessible socket-outlet near the
unit.
Do not position the ME equipment where it is difficult to
unplug the power plug.
If a fault should occur during operation of the unit,
operate the disconnect device to switch the power supply
off, or disconnect the power plug.
2
GB

Symbols on the product

Consult the instructions for use
Follow the directions in the instructions for
use for parts of the unit on which this symbol
appears.
This symbol indicates the manufacturer, and
appears next to the manufacturer's name and
address.
This symbol indicates the EU Importer, and
appears next to the EU Importer's name and
address.
This symbol indicates the European
Community representative, and appears next
to the European Community representative's
name and address.
This symbol indicates the date of
manufacture.
This symbol indicates the serial number.
This symbol indicates the version of the
accompanying document.
This symbol indicates the equipotential
terminal which brings the various parts of a
system to the same potential.
Storage and transport temperature
This symbol indicates the acceptable
temperature range for storage and transport
environments.
Storage and transport humidity
This symbol indicates the acceptable humidity
range for storage and transport environments.
Storage and transport pressure
This symbol indicates the acceptable
atmospheric pressure range for storage and
transport environments.
For customers in the U.S.A.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own expense.