Power One AURORA Manual Del Usuario página 14

INSTALLATION AND CONFIGURATION MANUAL
FOR AURORA PHOTOVOLTAIC INVERTERS
Should it be necessary to confi gure the channels in parallel, follow the following procedure:
Remove the front panel of the inverter
Using the AWG10/12 cables with insulated female fastons, connect the positive terminal of input 1 to a positive terminal
of input 2 (det. [L]). Repeat the connection for the negative terminals (det. [M]).
[M]
PVI-3.0/3.6/4.2-OUTD
Act on the dip-switch identifi ed by the INPUT MODE printing and put in on the PAR position (det. [N]).
[N]
PVI-3.0/3.6/4.2-OUTD
CONFIGURATION MODES FOR THE CHANNELS IN PARALLEL
Connection in parallel of the input channels.
[M]
PVI-10.0/12.5-OUTD
Confi guration dip-switch for input channel operation mode.
[N]
PVI-5000/6000-OUTD
[L]
[M]
PVI-5000/6000-OUTD
12 -EN
[L]
[N]
PVI-10.0/12.5-OUTD
[L]