Adding further items (tare function)
The tare function is useful if you wish to weigh the foods in a container but do not
wish to weigh the container itself.
■
Press the on/off button
the scales and press the on/off button
indicate a weight of "0" grams again.
■
Depending on the weight of the container (initial weight) the function and the
symbol display on the kitchen scales changes.
Weight of container (initial weight) less than 200 grams
NOTE
►
As long as you can see the symbol
further 5000 g.
■
Now place the amount to be weighed on the scales. The weight of the items
you have added will be shown on the display
■
Press the on/off button
weight of "0" grams again.
■
As long as the weight of the added goods does not exceed 200 g, the
display
■
If the weight of the added items exceeds 200 g (e.g. 250 g of flour), the
display
■
Now place a further quantity onto the scales. The weight of the items you
have added and the
■
Press the on/off button
the weighed partial quantities will be displayed. The weight of the container
is not included in the overall weight.
■
Press the on/off button
show "0" grams and the
often as required as long as a total weight of 5000 g is not be exceeded.
Weight of container (initial weight) more than 200 g; the display shows
the symbol
■
Now place a further quantity onto the scales. The weight of the items you
have added and the
■
Press the on/off button
the weighed partial quantities will be displayed. The weight of the container
is included in the overall weight.
GB │ MT
│
■
44
/ zero button
/ zero button
will show only the weight or "0".
shows the symbol
.
symbol will be shown on the display
/ zero button
/ zero button
symbol. You can repeat additional weighing as
symbol will be shown on the display
/ zero button
. Place the empty container on
/ zero button
again. The scales
on the scales you can weigh a
.
once. The scales indicate a
once and the overall weight of
once again. The scales will again
once and the overall weight of
.
.
SKWS 5 A1