Leveling The Dryer; Reversing The Door Swing - Kenmore 402.8903 Serie Manual De Uso Y Cuidado

LEVELING THE DRYER
WARNING
,, Wear gloves during installation.
,, Failure to follow these instructions can result in injury.
To ensure that the dryer provides optimal drying performance,
it must be level. To minimize vibration, noise, and unwanted
movement, the floor must be a level, solid surface.
NOTE: Adjust the leveling feet only as far as necessary to level
the dryer. Extending the leveling feet more than necessary can
cause the dryer to vibrate.
© © O) _Level
..... j_
LevelingFeet
1, To set the dryer to the same height as the washer, fully retract
the leveling feet by turning them counterclockwise, then
loosen the legs by turning them clockwise
Retract
fully
Then loosen
2, Adjust the leveling feet only as much as necessary to level the
dryer. Extending the leveling feet more than necessary can
cause the dryer to vibrate.
REVERSING THE DOOR SWING
The swing of the dryer door can be reversed to fit your
installation location.
1, Unplug the power cord.
2, Remove two door hinge screws.
3. Lift the door and remove it.
4. Remove a screw on the Frame
Front.
5, Remove the two screws on the
opposite side of the door hinge.
Remove two screws from the
holder lever.
Remove one black screw from the
door hinge.
/ ',
8. Reinsert the black screw in the
other hole.
9, Reinsert the screw (Step 4) on the
Frame Front.
10.Place the door on the other side
and reattach it to the dryer.
11,Reattach the holder lever.
12,Reattach the screws in the
remaining holes.
16
Kenmo:e Dryer Owners Manual-01 EN.indd 16 2010-06-17 _ C 3:33:48