Control Panel Features - Kenmore 402.8903 Serie Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNI NG:
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual, including the Important Safety
Instructions, before operating this dryer.
CONTROL
PANEL
FEATURES
F
D
A
B
C
E
A.
POWER (On/Off) BUTTON
Press to turn the dryer ON. Press again to turn the dryer OFF.
NOTE: Pressing the Power button during a cycle wilt cancel
that cycle and any load settings wilt be lost.
B. CYCLE SELECTOR KNOB
The CYCLE SELECTOR KNOB is used to select the desired
dry cycle by rotating the knob in either direction until the
desired cycle LED is illuminated. Once the desired cycle has
been selected, the standard presets for that cycle will be
shown in the display.
These settings can be adjusted using the Cycle Modifier or
Option buttons anytime before starting the cycle.(See the
cycle guide on page 20 for allowable settings. To protect your
fabrics, not all settings are allowed in all cycles.)
C. START/PAUSE BUTTON
Press the START/PAUSE button to begin the cycle.
The display will change, and the dryer will display the
estimated (AUTO DRY) or set time (TIMED DRY) remaining
and start tumbling. To pause the cycle at any time, open the
dryer door or press PAUSE. To resume the cycle where it was
stopped, press START/PAUSE again.
D. OPTION BUTTONS
The option buttons allow you to select additional cycle
options. The controls can be locked or unlocked by pressing
and holding the Control Lock button for 5 seconds.
MORE TIME and LESS TIME options are not available with
auto dry cycles.
For detailed information about the individual options, please
see the following pages.
E. CYCLE MODIFIER BUTTONS
Use these buttons to adjust the desired cycle options for the
selected cycle. The lights above the buttons show the current
selection. See page 23 for a complete description
(NOTE: Some settings are not allowed on some cycles.).
F. TIME AND STATUS DISPLAY
The display shows the estimated time remaining and the
cycle status. The display also monitors the vent and lint
screen status. See page 22 for a complete description.
18
Kenmoie
Dryer Owners Manual-01
EN.indd
18
2010-06-17
: C 3:33:49

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

402.9903 serie

Tabla de contenido