Status Messages - Panasonic DMR-E95H Instrucciones De Funcionamiento

Play menu—Change the play sequence
This function works only when the elapsed play time is displayed.
Repeat Play
≥All
[VCD] [CD] (excluding MP3 discs)
≥Chapter [HDD] [RAM] [DVD-R] [DVD-V]
≥Group
[DVD-A] [CD] (MP3 discs only)
≥PL (Play list) [HDD] [RAM]
≥Title [HDD] [RAM] [DVD-R] [DVD-V]
≥Track [DVD-A]
Select "OFF" to cancel.
Picture menu—Change the picture quality
Playback NR
Reduces noise and picture degradation.
§
Progressive ( page 53)
Select "ON" to enable progressive output.
Select "OFF" if the picture is stretched horizontally.
§
Transfer [When "Progressive" ( above) is set to "ON".]
Select the method of conversion for progressive output to suit
the type of material being played ( page 53, Film and video).
When the output signal is PAL
≥Auto
Detects 25 frame-per-second film content and
appropriately converts it.
≥Video:
Select when using "Auto", and the video
content is distorted.
When the output signal is NTSC
≥Auto1
Detects 24 frame-per-second film content and
(normal): appropriately converts it.
≥Auto2:
Compatible with 30 frame-per-second film
content in addition to 24 frame-per-second
film content. (Picture distortion may occur
depending on the content)
≥Video:
Select when using "Auto1" and "Auto2", and
the video content is distorted.
§
Only when you have set "Progressive" to "On" in the SETUP menu
( page 12).
Sound menu—Change the sound effect
V.S.S. [HDD] [RAM] [DVD-R] [DVD-V]
(Dolby Digital, MPEG, 2-channel or over only)
Enjoy a surround-like effect if you are using two front speakers
only.
≥Turn V.S.S. off if it causes distortion.
≥V.S.S. does not work for bilingual recordings.
Dialog Enhancer [DVD-A] [DVD-V]
(Dolby Digital, 3-channel or over only, including a centre channel)
The volume of the centre channel is raised to make dialogue
easier to hear.
[VCD] [CD]

Status messages

Status messages appear on the television when you operate the unit
to show the condition of the unit.
Press [STATUS].
The display changes each time you press the button.
≥Displayed information are examples.
Selected drive/type of disc
HDD
Recording or play status/input channel
REC
PLAY
TV audio type being received ( below)
STEREO
Selected audio type
L R
Recording drive/
DVD REC
Transfer (dubbing) progress indicator
Title number and elapsed time during
recording/Recording mode
Date and time
π
Remain
18:53:50 11.10.
π T2
0:05.14 XP
π T1
0:00.10 SP
Play position within the title
Title number and elapsed time during play/
Recording mode
No display
≥TV audio type
STEREO: STEREO/NICAM stereo broadcast
M 1/M 2: Bilingual/NICAM dual-sound broadcast
M 1: NICAM monaural broadcast
Available recording time and
recording mode
13:50 XP
Used HDD
space
RQT7463
29
29