The Effects Section - Steinberg PADSHOP Manual Del Usario

The Effects Section

Padshop features two insert effects in series: a modulation effect, and a delay. In
Padshop Pro, the effects section also contains an EQ and a global reverb effect.
Routing Section (Padshop Pro only)
The Routing section shows the signal flow. The signal passes the EQ first, then the
modulation effect, and then the delay effect. With the "To Reverb" control, you can
specify how much of the processed signal is sent to the global reverb effect.
Click the labels to display the corresponding settings to the right of the Routing
section. If the LED on a label is lit, the eq module or effect is activated.
EQ (Padshop Pro only)
A high-quality 3-band equalizer is available for each layer. The mid-range band acts as
peak filter and the low and high bands act as shelving filters. The mid-range band is
fully parametric with adjustable gain, frequency, and Q factor.
Low/Mid/High Gain
Sets the amount of cut or boost for the corresponding band.
Freq
Sets the frequency that is cut or boosted with the corresponding Gain parameter.
Q (Quality)
Adjusts the bandwidth of the mid-range peak filter from wide to narrow.
Modulation Effects
The first effect in the effect chain is the modulation effect. It can be used as a chorus
or as a flanger.
• To activate/deactivate the effect, click the On/Off button.
The following parameters are available:
Option
Type
Rate
Description
Determines which modulation effect is used.
Specifies the frequency of the pitch modulation.
19
Padshop/Padshop Pro
The Effects Section