Using
speedcook
features
Start section.
Before you begin, make sure the turntable is in place. Use the non-stick metal tray and your
own glass or ceramic cookware, if needed.
If the door is opened during cooking, the oven
will stop and PAUSE will appear in the display.
Close the door and press the START/PAUSE
pad to resume cooking.
At any time during cooking you can turn the
selector dial to change the cooking time. You
can change power levels by pressing POWER/
TEMP.
Things that
Cooking Times
are normal
you may see OPTIMIZING COOK TIME in
the display several seconds after you press
START/PAUSE. The oven automatically
senses the electrical voltage level in your
home and adjusts the cooking time up or
down for proper cooking.
Cooling Fans
end of cooking, the fans may continue to run
for a short time to cool internal components.
The fans will automatically shut off when the
internal parts of the oven have cooled.
oven is on.
Lights
around the door or outer case.
off during a speedcook cycle, sometimes
even at full power levels. This is normal.
The oven senses the heat level and adjusts
automatically.
12
When using speedcook programs, remember that the oven, door and
WARNING
dishes will be very hot!
Cuando utilice los programas de cocción rápida, recuerde que el
ADVERTENCIA
horno, compuerta y los platos se ¡encontrarán muy calientes!
The turntable must always be in
place when using the oven.
Speedcooking
Put food directly on the metal tray or metal grill tray to speedcook.
Speedcooking meats in the oven may produce
smoke.
To cook for additional time after a cooking
cycle has been completed, use the Resume
feature as instructed on the display.
Oven Heat
Speedcook cycles. The oven begins cooking
immediately.
hot. Use caution when opening the door and
removing food. Be cautious of steam or vapor
that may escape from around the door.
paper, plastic, or foil when speedcooking.
the oven may automatically reduce the power
levels to maintain the appropriate level of
oven heat.
Sounds
during cooking. The electronic control is
turning components on and off.
Interference
while using the microwave, similar to
the interference caused by other small
appliances. It does not indicate a problem
with the microwave. Move the radio or TV as
far away from the microwave as possible, or
check the position of the TV/radio antenna.
Advantium Oven