Connection Diagram - Pioneer PRS-A900 El Manual Del Propietario

Connecting the Unit

Connection Diagram

• This diagram shows connections using external output (subwoofer output). Slide the input switch to the left.
Fuse (40 A × 2)
Grommet
Speaker output terminal
See the "Connecting the
Speakers and Input
Wires" section
for speaker connection
instructions.
Fuse (25 A)
System remote control wire (sold separately)
Connect the male terminal of this wire to the system remote
control terminal of the car stereo (SYSTEM REMOTE CONTROL). The
female terminal can be connected to the auto-antenna relay control terminal.
If the car stereo does not have a system remote control terminal, connect the
male terminal to the power terminal through the ignition switch.
7
Special red battery wire [RD-228] (sold separately)
After making all other connections at the amplifier,
connect the battery wire terminal of the amplifier to
the positive (+) terminal of the battery.
Ground wire (Black) [RD-228] (sold separately)
Connect to metal body or chassis.
External Output
If only one input plug is used,
do not connect anything to RCA
input jack B.
RCA input jack A
Reverse side
Car stereo with
RCA output jacks
Connecting wire
with RCA pin plugs
(sold separately).
RCA input jack B RCA input jack B