Leuze electronic IPS 208i Manual Del Usuario página 15

NOTICE
Protective Extra Low Voltage (PELV)!
The device is designed in accordance with protection class III for sup-
ply with PELV (Protective Extra-Low Voltage).
Pin assignment
3
PWR / SWIO, M12 connector, A-coded
Pin No. Designation
1 VIN
2 GND
3 SWI1
4 SWO2
5 FE
6 n.c.
7 SWO5
8 SWO6
9 SWO7
10 SWO8
11 SWI3
12 SWI4
Thread FE (functional earth)
(M12
connector)
NOTICE
The core colors only apply if Leuze electronic's original connection ca-
bles are used (see operating instructions, chapter "Cables acces-
sories").
Core color Assignment
Brown +18 ... +30 V DC operating voltage
Blue Negative operating voltage (0 V DC)
White Digital switching input 1
(trigger)
Green Digital switching output 2
(READY)
Pink Functional earth
Yellow Not used
Black Digital switching output (-X)
Gray Digital switching output (+X)
Red Digital switching output (-Y)
Violet Digital switching output (+Y)
Gray/pink Digital switching input 3
(program selection 0)
Red/blue Digital switching input 4
(program selection 1)
Connection cable shield.
The shield of the connection cable is
on the thread of the M12 plug.
EN
15