Using Your Ceiling Fan - Emerson PORTLAND CF965BS00 Manual Del Usuario

USING YOUR CEILING FAN

Your SW605 wall control has full control of your fan and
NOTE: Prior to operation of the fan and light from the light.
wall control, set the fan speed to HIGH ( .... ) and turn
the light ON ( ).
11.1
To set the desired fan speed, press the (
decrease the speed and the (
The LED display will light up to indicate the new speed
11.2
selected.
To turn the downlight on, press and release the (
button. The light will turn on at the light intensity previously
selected. To change the intensity hold the button down.
The intensity will go up and down while the button is held.
11.3
Release the button at the desired intensity.
To turn the uplight on, press and release the (
The light will turn on at the light intensity previously
selected. The intensity will go up and down while the
11.4
button is held. Release the button at the desired intensity.
Your SW605 wall control comes complete with your choice
11.5
of three wall cover plates; ivory, white and light almond.
If airflow is desired in the opposite direction, press the
( ) button on the SW605 wall control. The fan must be
operating at any speed for the reverse button to function.
The blades will turn in the opposite direction and reverse
11.6
the airflow.
Your fan is now wired to be turned on and off from the fan
switch.
11. Using Your Ceiling Fan
(Figure 36)
) button to
) to increase the speed.
)
) button.
!
Fan installation must be completed, including the
installation of the fan blades, before testing the SW605
wall control.
POWER
INDICATOR
LIGHT
FAN
DIRECTION
FAN OFF
BUTTON
Figure 36
Please contact 1-800-654-3545 for further assistance
25
WARNING
LIGHT
BUTTON
HIGH TO LOW
SPEED BUTTONS
ON/OFF SWITCH
O = OFF / — = ON
emersonfans.com
ETL Model No.: CF965