Fuel Characteristics; Handling And Transport - Palazzetti IKI UP Manual De Instalación, Uso Y Mantenimiento

11 FUEL CHARACTERISTICS AND
DESCRIPTION OF THE STOVE

11.1 Fuel characteristics

The appliance should preferably be fuelled with
well-seasoned beech/birch wood. Each type
of wood has different characteristics that also
affect the combustion efficiency.
The use of conifers (pine-fir) is discouraged:
they contain high quantities of resinous
substances that quickly clog the flue.
It is prohibited to burn: waste, bark, wood
treated with paints, panels, coal, plastic
materials; in these cases the warranty of
the appliance is voided.
The continuous and prolonged use of
wood particularly rich of aromatic oils
(e.g. eucalyptus, myrtle, etc.) causes the
sudden deterioration of the internal
components of the product.
The wood must have a moisture content of not
more than 25%, an ideal length of about 33 cm
and must be placed in a horizontal position
taking care not to completely obstruct the slots
of the fire box grille.
It is forbidden to use the stove as an
incinerator. The combustion of waste is
prohibited in accordance with the law
on gas discharges. The burned gases
resulting from the combustion may
cause damage to the stove, to the flue
and damage your health.
12

HANDLING AND TRANSPORT

The stove is delivered complete with all the
parts provided.
Pay attention to the tendency of
overbalancing the stove.
These parts are contained in a packaging
suitable for long distance transportation. It is
advisable to unpack the appliance only when
it has arrived at the installation site.
20
12.1 Removal of the packaging
Follow the indications given in the product
manual to remove the product from the pallet.
Dismantling and disposal of materials may also
be entrusted to third parties, provided that
companies who are authorised to recover and
dispose of the materials in question are always
used.
Always follow the regulations in force in the
country in which the appliance is being used
for disposal of materials and possibly for the
disposal report.
12.2 Transportation
During lifting, avoid jerking or abrupt
movements.
Pay attention to overbalancing.
004773952 - 14/11/2019 - Italy
Make sure that children do not play with
the packaging components (e.g. films
and polystyrene):
Danger of suffocation!
Make sure that the forklift truck has a
capacity greater than the weight of the
product to be lifted.
The full responsibility of the lifting of
loads lies on the person handling the
lifting equipment.