Marklin Digital 60972 Manual Del Usario página 32

CV
Explanation
Bit 0: Motor inverted 1= on, 0 off
Bit 1: Light inverted 1= on, 0 off
51
Bit 2: Track inverted 1= on, 0 off
Bit 3: Aux 3 (1= logical, 0= amplified output)
Bit 4: Aux 4 (1= logical, 0= amplified output)
Motor type ... (Bit 0-4)
... Auxiliary function outputs 5 and 6
... Motor – Softdrive Sine
... Motor – without feedback control
52 ... Motor – High efficiency propulsion C90
... Motor – Bell armature
... Motor – direct current DC soft
... Motor – direct current DC hard
... Motor – direct current DC 1 Gauge
53
Motor feedback control – feedback control reference
54
Motor feedback control – feedback control parameter K
55
Motor feedback control – feedback control parameter I
56
Motor feedback control – feedback control influence
* () = 6021 Control Unit {} = the values entered are multiplied times "x" (factor)
1 An extensive table for function mapping can be found on the Internet at: http://www.maerklin.de/de/service/technische-informationen
32
CV Table for fx (MM)
Values
0 / 1
0 / 2
0 / 4
0 / 8
0 / 16
0 - 7
0
1
2
3
4
5
6
7
1 - 255 (0 - 63)*
{x4}*
1 - 255 (0 - 63)*
{x4}*
1 - 255 (0 - 63)*
{x4}*
1 - 255 (0 - 63)*
{x4}*
.
Default Notes
The values of the required settings
0
must be added up.
Selection of a motor type for addi-
tional settings for motor feedback
control.
or
5 Selection of additional function
outputs on an H0 decoder.
1
See extra table
outputs work as additional auxiliary
functions.
Absolute Vmax for motor characte-
10
ristic
20
Feedback control portion K
15
Feedback control portion I
0 = PWM without feedback control for
63
Sine (see also CV 52 motor type)
for how motor