30 Troubleshooting; Before Calling For Service - Signature Kitchen Suite UPCE3064ST Manual Del Propietário

30 TROUBLESHOOTING

TROUBLESHOOTING

Before Calling for Service

Before you call for service, review this list. It may save you time and expense. This list includes common
occurrences that are not the result of a defect in workmanship or materials.
Symptoms
Cooktop does not
work
Cooktop does not
heat
Element turns off
while cooking.
Elements do not get
hot enough.
A fan sound can be
heard.
Flashing
Flashing
Flashing
• Cooktop controls are locked.
- See USING LOCK OUT to turn off the LOCK OUT feature.
• Circuit breaker has tripped or fuse is blown.
- Reset the circuit breaker.
• Power outage.
- Check house lights to confirm power outage.
• Installation wiring not complete.
- Contact the installer or dealer.
• Incorrect Cooking Zone selected.
- Make sure the correct control is ON for the Cooking Zone being used.
• No power to cooktop.
- See "Cooktop does not work" above.
• Cooktop inner temperature too High.
- Check that cooktop has been installed according to the installation instructions.
• Touch controls may not be set properly.
- Check the power level.
• Cookware may not be flat or the correct shape or size.
- Use the recommended cookware. See pages 9-10.
• Cooktop inner temperature is High.
- This is normal.
The cooling fan will run when any element is turned on. With heavy use the
fan may continue to run after the controls are turned off until the cooktop has
cooled.
• There is a fault with thermistor or Micom.
- Turn the cooktop off using the Power ON/OFF. Turn cooktop back on using the
Power ON/OFF.
Possible Cause / Solutions