Crosby IP IPVK Manual Del Usuario página 5

1.3 how to operate the clamp
IPVK clamps are solely suitable for the lifting and vertical transport of steel tight head
EN
drums (ISO 15750-2).
08
See illustrations 5-6-7 for part reference.
1. Place the jaw of the clamp over the edge over the drum so that the camsegment
(B) is under the edge of the drum (5).
2. The clamp remains now in pretensioned position on the edge of the drum and is
ready for the lift. The camsegment (B) is here being tightened under the edge of
the drum (6).
3. During the descent of the drum, ensure that the drum will stand up straight again.
4. After the load is at its destination the clamp needs to be fully free of load. The
shackle (S) must move freely (7).
5. Open the clamp by pressing the clamping plate down (V) while your are holding
the body (N). The clamp can now be removed (7).
1.4 A reliable clamp, a secure basis for lifting
10 year warranty preventive maintenance procedure:
Parts should be replaced only when they no longer meet our standards.
10 year warranty repair procedure:
Parts should be replaced only when they no longer meet our standards.
Please consult www.crosbyip.com/warranty for more information on maintenance
procedures.
Maintenance without 10 year warranty: Annually clamps are subjected to inspection*
and parts will be replaced only when they no longer meet our standards.
*CrosbyIP authorised repairer
Copyright © 2013 The Crosby Group LLC. All Rights Reserved.
GEbrUikErShANdLEidiNG
Voor klemtypes: iPVk
Dichte stalen stopvaten (ISO 15750-2) hijsen
iNdEx
1.
1.1
1.2
1.3
1.4 Een betrouwbare klem, een goede basis voor hijsen
© The Crosby Group LLC. Niets uit deze originele gebruiksinstructie uitgave mag, op geen enkele
wijze, worden verveelvoudigd en/of openbaar gemaakt zonder voorafgaande schriftelijke toestem-
ming van The Crosby Group LLC.
Copyright © 2013 The Crosby Group LLC. All Rights Reserved.
Algemeen 10
veiligheidsvoorschriften 10
inspectieprocedures 11
Gebruik van de klem 12
12
NL
09