ITU UIT-T J Serie Manual Del Usuario página 250

cabhCtpConnProto OBJECT-TYPE
SYNTAX INTEGER {
udp
tcp
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protocol used in the Connection Speed Test.
testing is optional."
DEFVAL { udp }
::= { cabhCtpConnSpeed 5 }
cabhCtpConnNumPkts OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of packets the CTP is to send when triggered to
execute the Connection Speed Tool."
DEFVAL { 100 }
::= { cabhCtpConnSpeed 6 }
cabhCtpConnPktSize OBJECT-TYPE
SYNTAX INTEGER (64..1518)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the test frames."
REFERENCE
""
DEFVAL { 1518 }
::= { cabhCtpConnSpeed 7 }
cabhCtpConnTimeOut OBJECT-TYPE
SYNTAX INTEGER (0..600000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout value for the response.
no time out and can be used for TCP only."
DEFVAL {30000}
::= { cabhCtpConnSpeed 8 }
cabhCtpConnControl OBJECT-TYPE
SYNTAX INTEGER {
start(1),
abort(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control for the Connection Speed Tool. Setting this object to start(1)
causes the Connection Speed Tool to execute. Setting this object to abort(2)
causes the Connection Speed Tool to stop running. This parameter should only be
set via SNMP."
DEFVAL {abort }
::={ cabhCtpConnSpeed 9 }
244 Rec. UIT-T J.191 (03/2004)
(1),
(2)
-- 30 seconds
TCP
-- Max 10 minutes
A value of zero indicates