ITU UIT-T J Serie Manual Del Usuario página 278

DEFVAL { 0 }
::= { cabhCapMappingEntry 4 }
cabhCapMappingLanAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address type assigned on the LAN side.
4 is typically used."
DEFVAL { ipv4 }
::= { cabhCapMappingEntry 5 }
cabhCapMappingLanAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address assigned on the LAN side.
is typically used."
::= { cabhCapMappingEntry 6 }
cabhCapMappingLanPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The TCP/UDP port number on the LAN side."
DEFVAL { 0 }
::= { cabhCapMappingEntry 7 }
cabhCapMappingMethod OBJECT-TYPE
SYNTAX INTEGER {
static (1),
dynamic (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates how this mapping was created. Static means that it was
provisioned, and dynamic means that it was handled by the PS itself."
::= { cabhCapMappingEntry 8 }
cabhCapMappingProtocol OBJECT-TYPE
SYNTAX INTEGER {
other (1), -- not specified
icmp (2),
udp (3),
tcp (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The protocol for this mapping."
::= { cabhCapMappingEntry 9 }
cabhCapMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for the creation and deletion of a cabhCapMappingTable
entry. Changing the value of the IP address or port number columns of the CAP
Mapping Table may have an effect on active traffic, so the CMP will prevent
272 Rec. UIT-T J.191 (03/2004)
IP version
IP version 4