ITU UIT-T J Serie Manual Del Usuario página 252

DESCRIPTION
"The IP Address Type for CTP Ping Tool source address."
DEFVAL { ipv4 }
::={ cabhCtpPing 1 }
cabhCtpPingSrcIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address used as the source address for the Ping
Test. The default value is the value of
CabhCdpServerRouter (192.168.0.1)."
REFERENCE
" Specification Section 6.4.4"
DEFVAL { 'c0a80001'h }
::= { cabhCtpPing 2 }
cabhCtpPingDestIpType
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address Type for the CTP Ping Tool destination address."
DEFVAL { ipv4 }
::={ cabhCtpPing 3 }
cabhCtpPingDestIp
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Destination IP Address used as the destination address for
the Ping Test."
::= { cabhCtpPing 4 }
cabhCtpPingNumPkts OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of packets to send to each host."
DEFVAL {1}
::= { cabhCtpPing 5 }
cabhCtpPingPktSize OBJECT-TYPE
SYNTAX INTEGER (64..1518)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the test frames."
DEFVAL {64}
::= { cabhCtpPing 6 }
cabhCtpPingTimeBetween OBJECT-TYPE
SYNTAX INTEGER (0..600000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time between sending one ping and the next."
DEFVAL { 1000 }
::= { cabhCtpPing 7 }
246 Rec. UIT-T J.191 (03/2004)
OBJECT-TYPE
OBJECT-TYPE