ITU UIT-T J Serie Manual Del Usuario página 276

cabhCapUdpTimeWait OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inactivity time to wait before destroying
CAP mappings for UDP."
DEFVAL { 300 }
::={ cabhCapBase 2 }
cabhCapIcmpTimeWait OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The inactivty time to wait before destroying
CAP mappings for ICMP."
DEFVAL { 300 }
::= { cabhCapBase 3 }
cabhCapPrimaryMode OBJECT-TYPE
SYNTAX CabhCapPacketMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Primary Packet Handling Mode to be used."
DEFVAL { napt }
::= { cabhCapBase 4 }
cabhCapSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) causes all the tables in the CAP
to be cleared, and all CAP objects with defaults to be reset back to
their default values.
The objects to set to factory default values when this object is set to
'true' are listed below:
cabhCapTcpTimeWait,
cabhCapUdpTimeWait,
cabhCapIcmpTimeWait,
cabhCapPrimaryMode,
cabhCapMappingWanAddrType,
cabhCapMappingWanPort,
cabhCapMappingLanAddrType,
cabhCapMappingLanPort"
::= { cabhCapBase 5 }
--========================================================================
--
-- cabhCapMappingTable (CAP Mapping Table)
--
-- The cabhCapMappingTable contains the mappings for all CAP mappings.
--
--=========================================================================
270 Rec. UIT-T J.191 (03/2004)
-- 5 minutes
-- 5 minutes