Panasonic SC-HCC40 Instrucciones De Funcionamiento página 4

ly the supplied accessories.
Use numbers indicated in oarenmeses wnen asking for
replacement parts. (Product numbers are correct as of
February 2010. These may be subject to change.)
To order accessories, refer to "Accessory Purchases
(United States and Puerto Rico)" on page 17.
] 1 AC power supply cord [] 1 AM loop antenna
(K2CB2CB00021) , N 1 DYYYY00010
[] 1 FM indoor antenna [] 2 Batteries
(RSAX0002)
[] 1 Remote control _N2QAYB000523
Screw accessories (RFAX1O20_
[] 2 Fixing screws 0 []
(XYN3+J10FJ_
Wall bracket accessories RFAX1021_
1 Safety holder
fRMKX1015_
[] 1 Wall bracket
(RGQX10O4) [] Four=legged cushions
. RKAXO028-K_
- The ncluded AC 3ower supply cord s for use with this unit only. Do
hot use it with other eauiDment
- Do not use an AC power supply cord of other eauiomen]
I--
o
CC
|
@
Back View
USB cover
Exhaust holes
m Notes on speakers
• These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
• The speaker nets cannot be removed.
O Connect the FM indoor antenna.
* Tape the antenna to a wall or column, in a position with the
least amount of interference.
tape
_nna
Connect the AM loop antenna.
AM loop antenna
Stand the antenna ._-_<_____
up on its bas_e _[/ .....
Connect the AC power supply cord.
Connect the AC power supply cord after all other connections
are compmete.
To household AC outlet
Headphones (not included)
Reduce the volume level and connect the headphones.
Plug type: 3.5 mm (1/8") stereo
0
Avoid listening for prolonged periods of time to prevent hearing
damage.
Excessive sound pressure from earphones and headphones can
cause hearing loss.
Listening at full volume for long periods may damage the user's
ears.
Be sure to use the supplied or recommended
headphones or
earphones.
Portable audio equipment (during AUX mode)
AUX
(1) Plug the audio cord into the AUX jack.
Plug type: 3.5 mm (1/8") stereo
(_) Press [AUX] and start playback from the
portable audio source.
You can select the sound input level of the portable audio
equipment.
Press [PLAY MODE] repeatedly to select "HIGH" or "NORMAL".
* Switch the equalizer off or turn the volume of the portable
equipment down to reduce the input signal. High level of input
signal will distort the sound.
For details, refer to the instruction manual of the other equipment.
Cords and equipment are not included.
Keep the loose antenna cord away from other wires and cords.
4