Car Park Barrier - fischertechnik ROBO STARTER 8 MODELS Manual De Instrucciones

R O B O
Ta s k 2 :
To really impress the shop owner, you expand the program so that you can set the
number of strokes for one working cycle with a slider control and can also display the
number of parts produced.
P r o g r a m i n g Ti p s :
• Using variables, you count the strokes and the parts produced.
• Under the control elements, which are described in the ROBO Pro Handbook in chapter 8, you can find
the slider control to set the number of strokes.
• Sample program: Stamping press 2.rpp
Next Saturday, the new
parking garage is to be
opened in the city. Today, the
bar barrier was installed in the entrance.
Since in the meantime, it is well known that you are the best programer in the city, they asked you to
do the programing. Of course, you are proud of this and start work on this right away. Set up the model.
Ta s k 1 :
The bar barrier is to be opened by pressing the button, I3.
When the bar barrier is raised, the light goes green.
When the light barrier has been passed, the light goes to red and the bar
barrier is lowered.
P r o g r a m i n g Ti p s :
• To open and close the bar barrier, write a subprogram "open" and a subprogram "close."
• In the program sequence, first switch the light for the light barrier on (M4) and then switch the traffic
light to red (M2).
Ta s k 2 :
On the opening day, the parking garage is to be kept free for prominent guests.
For this purpose, those who are to be allowed to park are to receive a secret
number combination with three digits.
The bar is only to be raised when the correct code is entered.
The numbers are to be entered using an operator's console.
The numbers 1 to 6 are available for selection. The right code is 352.
S A
T A R T E R
B
C T I V I T Y O O K L E T
2 2
2 2
GB+USA

Car Park Barrier

Part 2
5 5
5 5