What Else Can You Do - fischertechnik ROBO STARTER 8 MODELS Manual De Instrucciones

R O B O
With a little bit of fantasy, you can certainly develop additional tasks for the models from the ROBO
Starter building set and write the programs for these. For example, the welding robot could make a spot
weld at a fourth position or the robot could move to these three positions in another sequence several
times. With some additional components, you could expand the stop light to cover an entire street
intersection with extensive traffic light controls. Just give yourself time to think because there are
certainly lots of further possibilities.
All program and operating elements are described in chapters 7 and 8 of the ROBO Pro handbook.
These chapters are very useful as references. It's worth reading!
There are also additional computing building sets from fischertechnik
The ROBO Mobile Set contains seven mobile robots and a crawler
robot. You can program these so that they can avoid obstacles or do
not fall off the table.
With the building set, Industry Robots II, the things you can build
include a grab robot with three axes of movement that can be easily
controlled with the mouse through a teach-in program. When this is done, the
robot remembers the positions and can automatically repeat the stored sequence.
The models in the building set, ROBO Starter, can also be operated with the ROBO
interface. This has its own memory and you can load the ROBO Pro programs into this
memory so that the model works independently of the PC. The ROBO I/O extension can also
be connected to this interface as an expansion module. This allows the number of inputs and
outputs to be increased for the ROBO interface. A total of up to three ROBO I/O extensions
may be connected to a ROBO interface.
In addition, with the help of the ROBO RF Data Link the ROBO interface can
communicate by radio transmission with a PC or other ROBO interfaces. This
is especially interesting for mobile models that can then play, for example,
soccer with each other.
Of course the models from various building sets can be combined and
this creates new extensive models and programing tasks. The
possibilities of the fischertechnik computing system are almost unlimited.
S A
T A R T E R
B
C T I V I T Y O O K L E T
2 2
2 2
GB+USA
What else
can you do?

What else can you do?

7 7
7 7