Instructions For Assembly; List Of Spare Parts - Kettler PX 1 Instrucciones De Montaje

I Before use, always check all screws and plug-in connections
as well as respective safety devices fit correctly.
I Always wear suitable shoes when using.
I Do not use corrosive or abrasive materials to clean the equip-

Instructions for Assembly

I Ensure that you have received all the parts required (see
check list) and that they are undamaged. Should you have
any cause for complaint, please contact your KETTLER dealer.
I Before assembling the equipment, study the drawings careful-
ly and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
I The equipment must be assembled with due care by an
adult person. If in doubt call upon the help of a second per-
son, if possible technically talented.
I Please note that there is always a danger of injury when
working with tools or doing manual work. Therefore please
be careful when assembling this machine.
I Ensure that your working area is free of possible sources of
danger, for example don't leave any tools lying around. Al-
ways dispose packaging material in such a way that it may
not cause any danger. There is always a risk of suffocation
if children play with plastic bags!
List of spare parts page 24-25-26
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see handling).
Example order: Art. no.07989-900 / spare-part no.
10100030/ 2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (in-
ternal) packaging, which is safe for transportation, in the origi-
nal box if possible.
It is important to provide a detailed defect description / dama-
ge report!
Important: spare part prices do not include fastening material;
if fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material".
ment. Ensure that such materials are not allowed to pollute
the environment.
I Nobody may be in the moving range of a training person du-
ring training.
I The fastening material required for each assembly step is
shown in the diagram inset. Use the fastening material
exactly as instructed. The required tools are supplied with
the equipment.
I Bolt all the parts together loosely at first, and check that
they have been assembled correctly. Tighten the locknuts by
hand until resistance is felt, then use spanner to finally tigh-
ten nuts completely against resistance (locking device). Then
check that all screw connections have been tightened firmly.
Attention: once locknuts have been unscrewed they no lon-
ger function correctly (the locking device is destroyed), and
must be replaced.
I To pull off the pedal arms remove cap and screw (A). Grip
the pedal arm tightly, and screw in an M12 bolt (not sup-
plied) into the thread (B). After a few turns you may take off
the pedal arm (C).
I For technical reasons, we reserve the right to carry out
preliminary assembly work (e.g. addition of tubing plugs).
Waste Disposal
KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).
GB KETTLER (GB) Ltd.
Merse Road · North Moons Moat · Redditch, Worcesters-
hire B98 9HL · Great Britain
http://www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road · Virginia Beach · Virginia VA
23450 USA
http://www.kettlerusa.com
5