Safety Instructions; Introduction; Warning Symbols Used; Safety Instructions For Appliance Safety - Hupfer TTW/M1/16 B-EN-115 Manual Del Usuario

Safety Instructions

Introduction

2 Safety Instructions
2.1 Introduction
The chapter on safety instructions describes the risks associated with the appliance in terms of product li-
ability (according to the EU Directive).
The safety instructions should warn of hazards and help to avoid damages to persons, the environment
and property. Please make sure that you have read and understood all the safety instructions given in this
chapter.
You must comply with the respectively valid national and international Safety at Work Regulations. The
manager is responsible for the valid regulations he/she has to provide. He/she must acquaint him-
self/herself and the operator with the new regulations.
In addition to these operating instructions, comply with the rules on health and safety at work issued by the
Main Association of the industrial Professional Associations, especially with those that concern the han-
dling of hot items and risks involved (BGR 110 "Protection of health and safety at work in restaurants" and
BGR 111 "Protection of health and safety at work in large-scale kitchens").
2.2

Warning Symbols Used

Symbols are used in these operating instructions to point out the dangers that can occur while operating or
cleaning the appliance. In both cases, the symbol provides information on the type and circumstances of
danger.
The following symbols can be used:
2.3

Safety Instructions for Appliance Safety

Safe operation of the appliance depends on appropriate and thorough use. Negligent handling of the appli-
ance can lead to danger to life and limb of the user and / or third parties as well as hazards to the appliance
itself and the other operator's property.
The following points are to be observed to ensure the appliance safety:
The appliance may only be operated as intended, when it is in perfect condition with regards to
technical standards, with awareness of safety and hazards and in accordance with the operating in-
structions.
All the operating and actuating elements must be in a perfect and functionally reliable condition with
regards to technical standards.
The appliance must be checked for external visible damages and defects whenever it is put into op-
eration. In case of damages, inform immediately the competent bodies and switch off the Tray
transport trolley.
Modifications or retrofits of the equipment are only permitted in consultation with the manufacturer
and on receipt of his written agreement.
The tray transport trolleys can start moving on their own and randomly if the casters are not locked
with the total brakes.
Release the total brakes before moving it. Moving the appliance with the total brakes locked can
damage the chassis!
Do not move the appliance over inclined surfaces or stairs. When approaching walls and moving
round obstacles always pay attention to persons or obstacles in the way.
During train operation it is not allowed to move the tray transport trolley faster than a walking pace.
It is difficult to brake and steer heavily laden appliances.
4330080_A0
General hazardous area
Chapter 2
Page 9
Tray transport trolley
TTW/M