Transport, Putting Into Operation And Decommissioning; Transport; Setting Up And Putting Into Operation; Storage And Recycling - Hupfer TTW/M1/16 B-EN-115 Manual Del Usuario

Transport, Putting into Operation and Decommissioning

Transport

4 Transport, Putting into Operation and Decommissioning
4.1 Transport
ATTENTION
When loading, use only hoists and load lifting devices approved for the weight of the tray transport trolley.
Only the transport vehicles may be used that are approved for the weight of the appliance.
The tray transport trolley is usually delivered as an assembled unit, i.e. it is completely assembled.
According to the valid purchase contract, the scope of delivery is specified in the shipping documents at-
tached to the delivery item.
4.2

Setting up and putting into operation

The installation and operation of the Tray transport trolley can be done only by the manufacturer or the
authorised personnel.
The Tray transport trolley should be thoroughly cleaned with a soft cloth before putting it into operation for
the first time. Before the appliance is put into operation it must be clean and dry.
The function of the operating elements must be checked before putting it into operation:
INFO
4.3

Storage and Recycling

Temporary storage must take place in a dry and frost-free environment. The Tray transport trolley must be
kept covered with a suitable covering material to be protected against dust ingress.
The appliance kept in the storage location must be checked for damages and corrosion every 6 months.
NOTE
NOTE
Before the appliance is taken back into operation it must be clean and dry.
If the Tray transport trolley is required to be recycled, all the operating and auxiliary materials must be dis-
posed in an environmentally compatible manner. The recyclable materials must be properly separated and
disposed in an environmentally compatible manner according to the local Waste Disposal Regulations. In
any case, the local bodies responsible for disposal are to be involved for this purpose. Separate the reus-
4330080_A0
Appliance damages caused by improper transport
In the case of off-site transport in a vehicle such as a lorry, the appliances
should be secured properly. If the appliances are not secured properly, there
is a risk of damage to property and persons caused by squashing.
During transport, secure all the individually standing appliances using corre-
sponding transport securing devices.
Disposal of packing material
The packing consists of recyclable materials and can be disposed of appro-
priately. Thereby, the different materials are to be separated and disposed in
an environmentally compatible manner. In any case, the local bodies respon-
sible for disposal are to be involved for this purpose.
Condensed water formation
Ensure that there is sufficient ventilation and no large temperature fluctuations
in the storage location to avoid condensed water formation.
Temporary storage
Tray transport trolleys that are not operated for a longer period of time should
be temporarily stored with opened doors in order to prevent odours in the
interior.
Chapter 4
Page 19
Tray transport trolley
TTW/M