GERATHERM oxy control 4c Instrucciones De Uso página 24

How to operate
After turning on the Oximeter, each time you press the power
switch, the Oximeter will switch to another display mode.
There are 8 display modes shown as follows:
1
SpO
2%
5
SpO
2%
Holding the power switch for longer than one second, will adjust
the brightness of the oximeter. There are 10 levels of brightness.
GB
The default level is level four.
Audible pulse rate indicator
During the measuring procedure you will hear a tone indicating
your pulse rate.
Alarm:
Range:
Alarm-modes: audible and visual alarm
• Visual alarm:
The measured pulse and oxygen values fl ash if they exceed
the previously set lower or upper limits.
• Audible alarm:
This can be switched on or off.
The alarm sounds briefl y twice if the measured values ex-
ceed the previously set limits.
2
PR
bpm
6
PR
bpm
SpO : < 90 %
2
Pulse rate: < 60 bpm oder >100 bpm
3
SpO
PR
2%
bpm
7
PR
SpO
bpm
2%
24
4
8