Charging; Risk Of Injury; Operation - Silk’n ReVit Prestige Manual Del Usuario

5.

Charging

Risk of injury

EN
Do not charge when the device is in use or if it is wet. Make sure it is dry
C
before charging.
Only charge the device with the enclosed charging cradle, USB adapter and
C
USB cable.
C
Charge the device at temperatures between 0 and 40 °C.
C
Always unplug the device after charging has been completed.
It takes about 3 hours to fully charge the device. When the charging process is
completed, the LCD display shows the charging status as full.
Option 1 (via mains supply):
1. Place the device
bottom to the pin of the charging cradle.
2. Connect the USB cable
connector to the USB adapter
3. Plug the USB adapter into a mains socket.
Option 2 (via USB port):
1. Connect the USB cable
properly installed.
2. Connect its USB connector to a compatible USB power source.

6. Operation

Clean all parts of the device before first use as described in the chapter
U
"Cleaning and maintenance".
U Make sure the filter, O-ring and the desired tip have been installed properly
before use.
Before treating an area for the first time, perform a skin sensitivity test on a
U
spot. If you have no adverse reaction, start your treatment.
1
onto the charging cradle
13
to the charging cradle and connect its USB
12
.
13
to the charging cradle
6
7
by fitting the hole in its
7
with the device