Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Preparation
Your appliance is provided with a dust bag. The
appliance is ready for use when all parts are
installed together.
1
I nsert the flexible hose
contact into the inlet on the main body of the
appliance until it latches in.
Note
To remove the flexible hose
■
release buttons buttons on the flexible hose
adapter
and then pull out the hose.
D
2
I nsert the end of the flexible hose to the metal
telescopic tube
.
C
Note
To adjust the length of the metal telescopic
■
tube
, push and hold the height setting
C
switch
and slide the tube out or in as
E
required. Release the height setting switch
and make sure that the tube clicks into place.
3
I nsert the multi-floor brush or crevice tool into
the lower end of the metal telescopic tube
_______________________________________
with the flexible
Q
press the side
Q
E
.
C
Note
Install all snap-on elements by pushing and
■
rotating to each other and remove them by
pulling and rotating.
Usage of multi-floor brush in two
different positions
Brush part shall be out while cleaning hard
surfaces and parquet floors.
Brush part shall be inside while cleaning carpets
and rugs.
Crevice tool
This accessory is suitable for removing dust
from bookcases, curtains, window frames and
upholstered furniture.
ENGLISH
17
Publicidad
