INFORMATION
Dust bag full indicator
Dust bag full indicator
when the suction power is reduced when the
thin pores of the dust bag are blocked by thin
dust. It shall also indicate if a big object blocks
the hose or suction clearance.
Replacing dust bag
1
U nplug the appliance.
2
O pen the dust container cover
on the dust container button
cover.
3
P ull out the filter holder.
4
D ispose of the dust bag.
Caution
Do not attempt to empty and re-use the dust
■
bag.
___________________________________
will provide a warning
O
by pressing
N
and lifting the
P
5
I nsert a new dust bag in the holder.
6
C lose the dust container cover
Note
You should use dust bags from Swirl®, Type Y
■
05® or Menalux®, Type 1840 for VCC 4350 A.
Caution
Do not use the appliance without the dust
■
bag. Dust container cover cannot be closed
without installing the dust bag.
Note
Even if the dust bag does not appear full,
■
vacuuming very fine dust such as flour or
plaster may block the pores instantly and
reduce the suction power. You shall replace
the dust bag even if it appears to be empty in
this case. Always replace the dust bag every
6 months even if it is not filled in order to
prevent foul odors.
Caution
Your appliance is equipped with a system that
■
prevents closing of the front cover when the
dust bag is not inserted. Please check whether
the dust bag is inserted if the front cover
cannot be closed.
.
N
ENGLISH
19