Sanus VF2012 Manual De Instrucciones página 10

2 Mount the Column(s)
Mount column [01] onto wall plate [02] by aligning the
slots of the column locking bar with the hooks on the
wall plate [02].
When the column [01] is pressed onto the wall plate
[02], the locking bar will lift slightly (see A) then drop
over the hooks of the wall plate (see B).
CAUTION:
damage! Be sure the hooks on the wall plate [02]
engage with the pillar [01]. The pillar must sit flush
with the wall.
[01]
3 Assemble Shelf Brackets
Add shelf rests [04] to shelf brackets [03] by fi tting them into notch
on edge of shelf brackets [03] and pressing down to secure.
Add nut plate [05] to shelf bracket with screws [10] using the 5/32 in.
hex key [14].
[03]
[14]
10
Avoid potential injuries or property
[04]
[10]
[02]
[01]
[05]
A
(S)
Leave a gap of 1.5mm (1/16 in.) between
the nut plate [05] and the back of the
bracket [03].
B
To lock the column
[01] in place, press
the locking bar
down and replace
top locking screw
(S) and tighten.
1.5 mm
(1/16 in.)
[05]
[03]
6901-170180 <05>