En - Installation Instructions - Kermi T. 10 Instrucciones De Empleo Y Montaje

EN – Installation instructions
The radiator may only be installed by a specialist.
Safety instructions
Read these instructions thoroughly prior to
►
installation/commissioning.
After installation, pass the instructions on
►
to the end user.
WARNING
Risk of injury!
Take the weight of the radiator into
►
account (see manufacturer's data).
At 25 kg and above work with lifting
►
equipment or several persons.
Conditions of use
Observe operating conditions for water
►
heating installations according to local
regulations.
Maintain water quality according to local
►
regulations.
Observe usage limits in humid spaces
►
according to local regulations.
Use radiator only in closed heating systems.
►
Store and transport radiator only in the
►
protective packaging.
Observe minimum clearances between
►
radiator and surrounding objects for air
circulation.
Complaint
Please contact the supplier.
►
Disposal
Packaging and any parts that are not need-
►
ed should be recycled or disposed of prop-
erly. Observe local regulations.
Technical features
•
Operating pressure: max. 10 bar
•
Test pressure: 1.3 x operating pressure
•
Flow temperature: hot water up to 110°C
(230°F)
Directions for installation
Protect radiator from damage
When installing, only remove protective
►
packaging at the fastening and connection
points.
Only remove protective packaging com-
►
pletely during final cleaning or prior to
commissioning.
Fixing
Note the number and position of mounting
►
points (see Fig. A).
Install mounting material according to
►
separate installation instructions.
Note: The two securing screws at the lower
brackets are not required for the short wall
bracket (two-row installation).
Connection
Unscrew painted blind plugs at the desig-
►
nated connection points.
Connect radiator with commercially avail-
►
able fittings upstream.
For connection of the radiator with an inflow
and return at the bottom:
Tightly cap open connections with vent
►
plugs (top) and blind plugs.
For connection of the radiator with an inflow
and return at the top:
Tightly cap open connections with blind
►
plugs.
Ensure that the radiator is vented via the
►
piping system,.
Removed blind plugs may only be used on Ker-
mi steel panel radiators.
Commissioning
Fill and vent the radiator. Risk of scalding!
►
Check radiator and connections for leaks.
►
5