Descargar Imprimir esta página

Danby DPAC10030 Manual De Instrucciones página 16

Publicidad

Key Pad Functions Fig. 5
The control panel on this unit "illuminates"
automatically when any key pad is depressed. This
"illumination" feature will "self-deactivate" (turn-off)
automatically approx. 20 seconds after the last key
pad is depressed.
I/O: Power Switch On / Off.
Indicator Lights:
RUN:
Blue Light illuminates to indicate selected mode
is operational.
Water Full Indicator Light:
Red Light illuminates indicating the internal water tank
(only) is full and/or incorrectly positioned inside
the cabinet. Fig. 6.
FAN: Selects optional fan speeds.
Fan Speed Options:
Cooling Mode: Low-Medium-High-Auto
Dry - Dehumidifying Mode: Low. (only)
Fan Mode: Low-Medium-High
Temp/Timer Adj:
:
Used to adjust Time of Day Clock settings forward
(1 min./1hr. increments).
I/O
Used to adjust Temperature settings forward
(1°C increments).
Used to adjust Temperature settings forward
(1°F increments).
Used to adjust Timer-On/Off settings forward
(1min/1hr. increments)
: Used to adjust Time of Day Clock settings backward
(1 min/1hr. increments).
Used to adjust Temperature settings backward
(1°C increments).
Used to adjust Temperature settings backward
(1°F increments).
Used to adjust Timer -On/Off settings backward
(1min/1hr. increments)
SWING: Allows the vertical louver grills to oscillate
from side to side automatically.
RUN
SWI NG
MODE
FAN
CLOCK: Allows you to initiate and/or change the
TIME OF DAY setting. To activate clock mode both
the TIMER ON and TIMER OFF buttons must be
pressed simultaneously.
TIMER ON: Used to initiate the AUTO ON start time
TIMER OFF:Used to initiate the AUTO OFF
stop time
I/O
SWI NG
MODE
FAN
A warning signal (beep) will sound for 20
WAT ER FULL
seconds and the Water Full indicator light
will illuminate.
TEMP/TIMER
ADJ
Temperature Conversion Chart
°C
10
11
12
13
°F
50
52
54
55
°C
22
23
24
25
°F
72
73
75
77
NOTE: This appliance provides a feature that will allow you the
option of setting "temperatures" in "Celsius" or "Fahrenheit".
To change the temperature display on the main unit, press both
the (Temp/Timer ADJ) keypads "simultaneously" to alternate
between the C & F scale
Celisus scale allows adjustments in increments of 1˚C
Farenheight scale allows adjustments in increments of 1˚F
8
RUN
WAT ER FULL
TEMP/TIMER
ADJ
TIMER ON TIMER OFF
CLOCK
14
15
16
17
18
19
57
59
61
63
64
66
26
27
28
29
30
31
79
81
82
84
86
88
TIMER ON TIMER OFF
CLOCK
Fig. 5
Fig. 6
20
21
68
70
32
33
90
91

Publicidad

loading