Publicidad
Remote Control Operating
Instructions (cont'd)
6. Swing: Press the "Swing" button to activate the
automatic air swing (oscillation) feature. The
symbol "
"will appear in the display window
confirming the "swing" feature is activated. To
deactivate the "swing" feature, press the swing
button again.
7. RE-SET: Press the "re-set" button to cancel all
remote control programs. This will erase "all"
information contained within the remote control
display window (including time of day clock
setting).
8. +
-
C & F: Press either of the temperature
buttons to select (incresae / decrease) operating
temperatures. Press both button simultaneously
to switch from "Celsius" to "Fahrenheit".
9. SLEEP: NOTE: The sleep mode feature can only
be programmed using the hand held remote
control.
The sleep mode allows you to program a set
cooling temperature that will gradually increase
the set operating temperature "+0.5ºC / 0.9º F"
(during night time sleeping hours) resulting in less
compressor running time saving energy
consumption and preventing the room from
becoming to cold during sleeping hours. See the
table below for temperature differentials during an
8 hour period.
EXAMPLE:
Time Period (Operation)
(Above Set Temperature)
1st Hour
2nd Hour
3rd Hour
4th Hour
5th Hour
6th Hour
7th Hour
8th Hour
Set Operating Temperature
1) Press the sleep button on the remote control.
2) The set temperature will appear in the display
window of the remote.
Temperature Increase
+0.5ºC
+0.5ºC
+0.5ºC
+0.5ºC
+0.5ºC
+0.5ºC
+0.5ºC
Automatically returns to
LCD Window
3
6
2
3) Press the
the required "set" operating temperature.
4) The unit is now programmed for sleep mode
NOTE: When turning off the main unit with the
remote control, there may be a delayed (off)
reaction (5-15 seconds) before the unit actually
stops. This is normal.
rnal Water Tank
Feature Works
19
5
9
temperature buttons to select
4
8
Publicidad
