Electrical Safety; Special Safety Instructions For Lathes; Hazard Warnings - Holzmann ED400FD Instrucciones De Servicio

on the machine, wait until all tools or machine parts have come to a complete standstill
and secure the machine against unintentional restarting.
 Do not work on the machine if it is tired, not concentrated or under the influence of
medication, alcohol or drugs!
 Do not use the machine in areas where vapours from paints, solvents or flammable liquids
represent a potential danger (danger of fire or explosion!).
16.5

Electrical Safety

 Make sure that the machine is earthed.
 Only use suitable extension cords.
 Proper plugs and sockets reduce the risk of electric shock.
 The machine may only be used in humid environments if the power source is protected by
a residual current circuit breaker.
16.6

Special Safety Instructions for Lathes

 Clamp the workpiece firmly before turning on the lathe.
 Clamp the lathe tool to the correct height and as short as possible.
 Do not wear gloves when turning!
 Keep sufficient distance from all rotating parts.
 Switch off the lathe before measuring the workpiece.
 Remove the clamping key from the chuck after each tool change.
 Never remove any chips by hand! Use a chip hook, rubber wiper, hand brush or brush.
 When using cooling lubricants, observe the manufacturer's instructions and use a skin
protection agent if necessary.
16.7

Hazard Warnings

Despite intended use, certain residual risks remain when operating the machine. Due to the
design and construction of the machine, hazardous situations may occur which are identified as
follows in these operating instructions:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death..
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
HOLZMANN MASCHINEN GmbH
DANGER
WARNING
CAUTION
NOTICE
www.holzmann-maschinen.at
SAFETY
45
ED400FD | ED400FDDIG